New
Advantech ADAM-6000 Applicaiton-Ready Temperature Solutions
The
integration of automation and enterprise systems requires
a shift in the architecture of open control systems and can only
be accomplished through Internet technology. In addition to general
browser-based data acquisition applications, dedicated vertical
market requirements such as temperature applications are becoming
the trend of future automation. Answering this demand for an application-ready
optimized solution, Advantech is introducing the new ADAM-6000
temperature measurement and control series, consisting of: ADAM-6022,
a dual-loop temperature control module; ADAM-6015, a 7-channel
RTD input module; and ADAM-6018, a 8-channel thermocouple input
module.
The comprehensive
temperature measurement and control solution provides users
with high-speed Ethernet communication interface as well as
built-in web page to allow browsing module status anywhere.
Adopting a fast Ethernet network, these temperature modules
support Modbus/TCP, TCP/IP & UDP Ethernet protocols to enable
easy system integration and strong communication performance.
Built-in web pages permit users to adopt standard web pages
or customize their web pages via Advantech's JAVA Applet example
program.
ADAM-6022
The new ADAM-6022 PID dual-loop controller targets temperature
control applications. With control algorithm built-in, it provides
2 Analog Output, 6 Analog Input, 2 Digital Output, and 2 Digital
Input channels combined into one module. Users can fill the
parameters (Pv, Mv, & Sv) and set the operation mode (Auto/Manual/Free)
through an easy-to-access utility software. Target markets include
building automation and facility temperature control systems.
| Part
Number |
Description |
| ADAM-6022 |
Ethernet-enabled
Dual-loop PID Controller |
ADAM-6015
The new ADAM-6015 7-channel RTD input module accepts a wide
range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508,
and Balco 500 series. Muti-input ranges are allowed in one module,
creating a cost-effective solution. Most important of all, the
ADAM-6015 supports open wiring diagnostic function which warns
operators when the sensor wire is broken. It specifically aims
at building and factory temperature monitoring applications.
| Part
Number |
Description |
| ADAM-6015 |
7-channel
RTD Input Module |
ADAM-6018
The ADAM-6018 8-channel thermocouple input module is the best
solution for T/C data acquisition based on the Ethernet. In
addition to 8 T/C input channels, the ADAM-6018 is also equipped
with 8 digital output channels such as auxiliary alarm outputs
or pure outputs. Last but not the least, the ADAM-6018 comes
with an external din-rail terminal board for wiring between
the ADAM-6018 module and the field sensor. This special wiring
mechanism greatly enhances the accuracy and reliability for
thermocouple measurement in environmental and facility monitoring
applications.
| Part
Number |
Description |
| ADAM-6018 |
8-channel
Thermocouple Input with Digital Output Module |
>>
Click
here to see details on Advantech's complete line of ADAM-6000,
temperature measurement and control series.
Contact
Advantech Industrial Automation for More Information:
website:
http://www.advantech.com/ia
Email: info@advantech.com
Advantech Industrial Automation Office locator: Click
Here
